Log in

View Full Version : wheat paste



Organic Revolution
31st August 2005, 04:31
Supplies needed:

*

Wheat flour
*

Water
*

Paint brushes or inexpensive sponge brushes
*

Fliers and/or posters
*

Container with lid
*

Gloves*
*

Plastic bag*

* Optional

Whether you're pasting artwork, political posters or fliers for a show, wheat paste is a good medium to glue them up with. Unlike wallpaper paste, wheat flour is cheap and easy to get a hold of. If you're going to be doing a lot of pasting, a bucket with a lid, a handle, and a paint roller work well. Otherwise a plastic container with a lid will hold enough.

Pour dry wheat flour into the container about 1/3 of the way full. Slowly mix it with water, stirring as you do so. You want the wheat paste to be thin enough to paint onto walls but thick enough to stick.

To put something up paint the wall with a thick layer of paste and smooth your poster over it. Make sure you glue the edges down. Don't paste over the poster or you won't be able to see it. Wheat paste is not clear. If you're worried that the poster might get damaged in the weather, or if you want to make it harder to take down, spray [or paint] a clear coating of shellac over it. The wheat paste sticks best to surfaces like cement. If you put the poster up well enough the only way anyone is going to be able to take it down is by buffing it off.

If you're worried about being linked to the crime, wear gloves and carry a plastic bag with you. If you see a security guard or a police officer, put all your wheat pasting supplies in the bag. To make it even less suspicious wear some nice light-colored clothing (so that the wheat paste doesn't show up on it) and carry a Gap shopping bag. Play it off.

Remember, it's best to wheat paste with a purpose. It's a great way to make a political (or anti-political) statement or put up your artwork for others to enjoy. Good luck and have fun!

Elect Marx
31st August 2005, 06:45
Originally posted by organic [email protected] 30 2005, 09:49 PM
Pour dry wheat flour into the container about 1/3 of the way full. Slowly mix it with water, stirring as you do so. You want the wheat paste to be thin enough to paint onto walls but thick enough to stick.
How much water then? 2/3 water?


To put something up paint the wall with a thick layer of paste and smooth your poster over it.

How thick?


If you're worried that the poster might get damaged in the weather, or if you want to make it harder to take down, spray [or paint] a clear coating of shellac over it.

Does any particular type work best? Any shellac?


The wheat paste sticks best to surfaces like cement. If you put the poster up well enough the only way anyone is going to be able to take it down is by buffing it off.

What about wood and metal posts? Glass?

Donnie
31st August 2005, 12:52
It should work on metal and wood but I doubt glass because of the paste being on a kind of slippery surface.

Organic Revolution
31st August 2005, 15:45
Originally posted by 313C7 iVi4RX+Aug 31 2005, 12:03 AM--> (313C7 iVi4RX @ Aug 31 2005, 12:03 AM)
organic [email protected] 30 2005, 09:49 PM
Pour dry wheat flour into the container about 1/3 of the way full. Slowly mix it with water, stirring as you do so. You want the wheat paste to be thin enough to paint onto walls but thick enough to stick.
How much water then? 2/3 water?


To put something up paint the wall with a thick layer of paste and smooth your poster over it.

How thick?


If you're worried that the poster might get damaged in the weather, or if you want to make it harder to take down, spray [or paint] a clear coating of shellac over it.

Does any particular type work best? Any shellac?


The wheat paste sticks best to surfaces like cement. If you put the poster up well enough the only way anyone is going to be able to take it down is by buffing it off.

What about wood and metal posts? Glass? [/b]

How much water then? 2/3 water?
obviously :D :P


How thick?
about a CM thick, i dont know what that would translate into metric like.



Does any particular type work best? Any shellac?
i use any i can find.


What about wood and metal posts? Glass? it works alright on wood, great on metal and terrible on glass.

Anarchist Freedom
31st August 2005, 17:54
Thank you I will be using this.

Martin Blank
31st August 2005, 18:00
Wheat paste is easy and good to use, but there is still the problem that anything you put up with it can be easily torn down. There is a solution to this, however, if you want your posters to remain up permanently.

In addition to the ingredients listed above, get a couple of glass bottles or Mason jars and break them up into fine shards. Mix the shards in with the paste. This adds an extra bonding material and firmness -- similar to how gravel is used in asphalt or mortar. It also means that anyone who is trying to tear down your posters will think twice about it.

Miles

Elect Marx
1st September 2005, 05:50
Originally posted by [email protected] 31 2005, 11:18 AM
In addition to the ingredients listed above, get a couple of glass bottles or Mason jars and break them up into fine shards.
Alright; any finely smashed glass would work?
How much glass?


It also means that anyone who is trying to tear down your posters will think twice about it.

:lol: HAHAHA! Will this diminish the quality though?

Martin Blank
1st September 2005, 10:37
Originally posted by 313C7 iVi4RX+Sep 1 2005, 01:08 AM--> (313C7 iVi4RX @ Sep 1 2005, 01:08 AM)
[email protected] 31 2005, 11:18 AM
In addition to the ingredients listed above, get a couple of glass bottles or Mason jars and break them up into fine shards.
Alright; any finely smashed glass would work?
How much glass?


It also means that anyone who is trying to tear down your posters will think twice about it.

:lol: HAHAHA! Will this diminish the quality though? [/b]
A couple of quart Mason jars or old-style milk bottles will work for the amount of wheat paste listed above. Just make sure to grind them relatively fine -- not into powder, but into small shards.

First, put the glass into a bag or cloth sack for the initial breaking into small (roughly 1" or less) pieces. Then, pour the contents either into a bowl or a shallow pan. If you have a heavy rolling pin (for the shallow pan) or something to use as a mortar (as in mortar and pestal), grind the glass into fine pieces. If you have access to one of those old-fashioned lawn rollers (the big concrete-filled barrel attached to a handle), you can just use that and not have to transfer the glass out of the bag or sack.

Miles

Elect Marx
1st September 2005, 19:04
Originally posted by [email protected] 1 2005, 03:55 AM
First, put the glass into a bag or cloth sack for the initial breaking into small (roughly 1" or less) pieces. Then, pour the contents either into a bowl or a shallow pan. If you have a heavy rolling pin (for the shallow pan) or something to use as a mortar (as in mortar and pestal), grind the glass into fine pieces. If you have access to one of those old-fashioned lawn rollers (the big concrete-filled barrel attached to a handle), you can just use that and not have to transfer the glass out of the bag or sack.
That is good to know ;) but what about the anawers to my other questions?

Martin Blank
2nd September 2005, 05:55
Originally posted by 313C7 iVi4RX+Sep 1 2005, 02:22 PM--> (313C7 iVi4RX @ Sep 1 2005, 02:22 PM)
[email protected] 1 2005, 03:55 AM
First, put the glass into a bag or cloth sack for the initial breaking into small (roughly 1" or less) pieces. Then, pour the contents either into a bowl or a shallow pan. If you have a heavy rolling pin (for the shallow pan) or something to use as a mortar (as in mortar and pestal), grind the glass into fine pieces. If you have access to one of those old-fashioned lawn rollers (the big concrete-filled barrel attached to a handle), you can just use that and not have to transfer the glass out of the bag or sack.
That is good to know ;) but what about the anawers to my other questions? [/b]
It doesn't degrade the quality at all. In fact, the small pieces of glass will reflect light and almost make the posters "glow" -- which, of course, will grab someone's attention.

Miles

Anarchist Freedom
2nd September 2005, 06:29
interesting.

novemba
6th September 2005, 03:38
http://www.stencilrevolution.com/forum/viewtopic.php?t=8536